Experimental Study of Cohesive Embankment Dam Breach Formation due to Overtopping
Abstract
The recurrent floods in recent decades have imposed a challenge of embankment dam breaching, which needs great attention through improved design methods that are based on risk approach, the evacuation plans for people at risk, etc. In this study, based on the small-scale model tests a series of experiments were conducted to determine the breaching process of cohesive embankment dam using a simplified physical based breach model due to overtopping; the breach process observed during tests in the laboratory and the results from analyzed parameters are described. Five dam models, three of which were constructed with homogenous clay soil while two were sandy-clay mixture tested. The heights of the embankments dam were 0.45 m, and the widths at the crest were 0.20 m. The data from these examinations indicated that headcut erosion played an important role in the process of breach development. Initiation of erosion, flow shear erosion, sidewall bottom erosion, and distinct soil mechanical slope mass failure from the headcut vertically and laterally were all observed during these tests. In this physical based experimental model, the initial scouring position calculated by applying a hydraulic method, the broad crested weir formula used for breaching flow discharge and flow velocity computed based on breach flow discharge. The stability of the side slope failures was estimated by comparing the resisting and deriving force. Further, using data from laboratory experiments, the calculated peak breach discharge, breach characteristics times, breach widths, and breach flow velocity generally agreed well with the measured data and also the knowledge acquired from observed breach process at several stages. Finally, the accuracy of model was checked by root-mean-square-error.
Keywords:
cohesive embankment dam, headcut, overtopping, breach parameters, initial scour positionPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

