Influence of Polymeric Coating the Aggregate Surface on Moisture Damage of Hot Mix Asphalt
Abstract
Moisture damage is one of the common causes of asphalt pavement failure in moisture presence. One of the convenient approaches to decreasing moisture sensitivity in hot-mix asphalt is coating the aggregate surface with a suitable agent. In this study, the effects of polyethylene terephthalate on moisture damage of asphalt mixtures were evaluated by applying indirect tensile strength and resilient modulus tests. The asphalt specimens were prepared with two types of aggregates (granite and limestone) and neat asphalt binder of 60/70 penetration grade. The results showed that the ratio of wet/dry values of indirect tensile strength and resilient modulus for mixtures containing limestone was higher than those of the samples with granite aggregate. Furthermore, the results of the laboratory tests indicate that polyethylene terephthalate improves resistance to moisture susceptibility. Because polyethylene terephthalate increases the wettability of asphalt binder over the aggregate and the adhesion between the asphalt binder and aggregate, especially in the mixtures containing acidic (granite) aggregate prone to moisture damage.
Keywords:
hot mix asphalt, moisture damage, polyethylene terephthalate, indirect tensile strength, resilient modulusPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

