A Numerical Comparison between Spiral Transverse RC and CFST Columns under Loads of Varying Eccentricities
Abstract
This paper is the first to present the results of a numerical comparison between the performances of two newly developed concrete columns namely: multi-tied spiral transverse reinforced (MTSTR) column and concrete-filled steel tube (CFST) column under eccentric compressive loads. The behavior of MTSTR columns under eccentric loads has not been studied until today and also this behavior is not compared to that of the CFST columns. The numerical models of these columns were constructed using the nonlinear finite element method and validated against the previously published experimental data in the literature. Concrete damage plasticity model and elastic-perfect plastic model were used to simulate the behavior of concrete core and steel of the columns, respectively. This provides the capability of modeling of the nonlinear large deformations of the columns. The obtained results show that the MTSTR columns can provide greater load carrying capacity, ductility, and energy absorption with slightly lower initial stiffness than the CFST columns under the same eccentricities. For instance, the load-carrying capacity of MTSTR column is 18 percent greater than that of the CFST column when the load eccentricity is 100 mm. In case of 100 mm eccentricity, the ductility of the improved version of the MTSTR column proposed in this study is 30 percent greater than CFST one.
Keywords:
multi-tied spiral transverse reinforced column, concrete-filled steel tube column, numerical analysis, eccentric load, load carrying capacityPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

