Plate-like Buckling Resistance of Longitudinally Stiffened Plates Subjected to Pure Compression
Abstract
Plate buckling resistance calculation of orthotropic plates and the determination of the effective width is highly important in the design of bridges. The current effective width calculation method provided by the EN 1993-1-5 [1] is developed for I-sections subjected to bending. Previous research results proved that the application of the plate buckling curve can overestimate the buckling resistance in case of square box sections subjected to pure compression. It means, that the required safety level of the Eurocode is not fulfilled for buckling resistance of plates in compression. Several previous studies proved the unconservatism of the EN 1993-1-5 for this special case, where the plate has no support coming from the adjacent plates. The question arises, if the above mentioned calculation process also leads to unsafe resistances for other structural details, or this is the specialty of the analyzed worst case scenario. Longitudinally stiffened plates (bottom flange of steel box sections) subjected to pure compression could be also a worst case scenario, because they are not supported by adjacent plates and they are loaded by pure compression. Therefore, the current research focuses on the investigation of longitudinally stiffened orthotropic plates loaded by pure compression and investigates (1) the plate-like buckling resistance, (2) the applicability of the Winter curve and (3) determines the necessary partial safety factor according to the safety requirements of the Eurocode. In the present paper the results of an extensive numerical research program are introduced and the applicability of the Winter curve is evaluated based on the safety requirements of the Eurocode.
Keywords:
plate buckling, orthotropic plates, closed section stiffeners, partial safety factorPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

