Numerical Investigation to Quantify the Rate of Damage within Mortar Bituminous Materials: Modeling of Cracks Initiation and Propagation
Abstract
Asphalt concrete is highly used to construct pavement layers in the civil engineering field. It is defined as a complex medium composed of aggregates (inclusions), mortar (matrix) and air void. The mortar itself is a mixture of fillers, sand and bitumen. Furthermore, mortar is the phase that links the coarse aggregates. In general, fracture of asphalt concrete occurs within mortar or among aggregate-mortar interface. Therefore, two types of fracture can be identified, i.e., adhesive and cohesive damages. The first type is occurred among the interface of aggregate-mortar. The second is taken place within the mortar. This paper presents numerical investigations of the damage initiation and stiffness degradation within the asphalt concrete matrix. Numerical simulations were carried out to investigate, firstly, how damage is initiated and developed, and then, to simulate how cracks can be initiated and propagated within this material. Cohesive finite elements method was adopted to simulate fracture. For adhesive damage, the model was represented by one rectangular aggregate that is linked to the asphalt concrete thanks to a thin layer of the mortar. For cohesive damage, the model was considered as a thick layer of the mortar in between two coarse aggregates. The applied loading was derived from the speed of traffic vehicle. A comparative analysis between four mortars was conducted. The effect of loading and the type of mortar on damage initiation and stiffness degradation will be shown. Moreover, the initiation and propagation of cracks as function of loading and stiffness modulus will be illustrated.
Keywords:
damage, fracture, finite elements modelling, asphalt concrete, cohesive element, adhesive and cohesive damagePublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

