Effects of Brace Configuration and Structure Height on Seismic Performance of BRBFs Based on the Collapse Fragility Analysis
Abstract
The brace configuration and structure height are two factors that have a significant effect on the seismic behavior of braced frame buildings. In the present study, the buckling-restrained braced (BRB) frames were considered to estimate the effect of these two parameters using probabilistic seismic assessment methods. The uncertainty in the different parameters involved in the seismic design of the structural system was also considered. Four, six, and ten-story buildings with the Chevron and inverted Chevron bracing configurations were designed, and their responses due to various ground motions were estimated using incremental nonlinear dynamic analyses. Fragility curves, mean annual frequency of exceeding immediate occupancy (IO), and collapse prevention (CP) states were generated using probabilistic seismic analysis, fragility curves concept, and drift hazard curves. The results demonstrate that the inverted Chevron type BRBFs has better structural performance than Chevron bracing types. Furthermore, an increase of the height of structures, despite lower drift’s hazards, increases the fragility probability.
Keywords:
bracing configuration, height of structure, mean annual frequency, seismic demand hazard, Buckling Restrained BracesPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

