Investigating the Effect of Some Train and Track Parameters on Contact-impact Forces in the Vicinity of a Rail Breakage
Abstract
Broken rails or welds are the main causes of derailment in railway networks. Therefore, a wheel-rail interaction model, which precisely estimates contact-impact forces in the presence of broken rails, can have a significant effect on derailment risk reduction. This paper attempts to present contact-impact forces in the vicinity of broken rails by employing a detailed 3D finite element model. The model is verified using a field test carried out on a ballasted railway track. Effects of train speed, gap length, axle load and railpad and ballast characteristics are studied on rail-wheel contact forces as well as on railpad and ballast forces. Results suggest that increasing the train speed from 60 km/h to 110 km/h would increase dynamic impact force from 2.46 to 4.11. It is also observed that increasing axle load results in an increase in the wheel-rail impact forces and in railpad and ballast forces, while leading to a reduced dynamic impact factor. Furthermore, investigating the effect of the track parameters demonstrates that ballast stiffness is the most important characteristic of the track, which has a reverse effect on dynamic impact forces. Moreover, unloading length increase and consequently derailment risk increase is highly sensitive to increasing train speed.
Keywords:
wheel-rail interaction, contact-impact force, rail breakage, finite element, dynamic analysisPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

