Effect of Gilsonite Use on Storage Stability of Styrene-butadiene-styrene Modified Bitumen
Abstract
Styrene-butadiene-styrene (SBS) polymer is one of the most preferred additives to improve performance in hot mix asphalt pavements. The storage instability, in other words, the separation of a polymer-rich phase from the bitumen-rich phase in the course of storage and transportation is one of the prevalent problems in SBS modified bitumen. The present study attempted to obtain modified bitumen at the same performance level with the SBS modified bitumen, but stable with respect to the storage stability. For this purpose, both SBS and American Gilsonite (AG) were used in modified bitumen production. It was determined that modified bitumen at the same performance level was obtained with the use of 5 % SBS or 18 % AG in bitumen modification. It was also determined that the performance levels of the modified bitumen obtained with the use of 2 % SBS + 13 % AG, 3 % SBS + 10 % AG and 4 % SBS + 6 % AG were similar. Additionally, 2 %, 3 % and 4 % SBS modified bitumen were used for the assessment of storage stability properties of the SBS modified binders. These 8 different modified bitumen samples were tested for storage stability based on the EN 13399 standard. Penetration, softening point, rotational viscometer, bending beam rheometer, and dynamic shear rheometer tests were conducted on the samples. Based on all conducted tests, it was determined that more stable binders were obtained with the use of AG and SBS in terms of storage stability compared to solely SBS modified bitumen.
Keywords:
storage stability, bitumen, modification, styrene-butadiene-styrene, American GilsonitePublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

