Effect of Expanded Perlite Aggregate Size on Physical and Mechanical Properties of Ultra Lightweight Concrete Produced with Expanded Perlite Aggregate
Abstract
In this study, ultra-light weight concrete (ULWC) with heat-insulating properties is produced by using different size expanded perlite aggregates and various admixtures. The compressive strength, 4 point bending strength, freezing and thawing resistance, water absorption, dry unit weight, ultra sound velocities and thermal conductivity of the samples were determined by applying appropriate tests. The effect of different size expanded perlite aggregate on the properties of ULWC were also investigated in this study and it was found that as the expanded perlite aggregate diameter increased, the void volume uniformity, water absorption percentage and freezing-thawing resistance increased while the unit volume weight of ULWC samples, ultrasound speed velocities, thermal conductivity and compressive strength were decreased. The changes in the masses and compressive strength of ULWC samples subjected to freezing and thawing cycles were examined. The compressive strength loss was found to be between 5 % and 47 % while the weight loss was between 1 % and 3.5 % after 15 freezing and thawing cycles. Finally, the effects of the admixtures on the fresh properties of ULWC were examined and it was determined that the use of 4.5 kg of air-entraining material in one cubic meter of concrete mix is the most ideal ratio and the use of more than 0.01 % by volume of polypropylene fiber is caused settlements in fresh concrete mixtures.
Keywords:
expanded perlite, thermal conductivity, mechanical and physical properties, ultra lightweight concretePublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

