Drilled Core Specimen Testing Method for Determination of Tensile Strength Values of Rock Materials
Abstract
In this study, a new direct tensile strength determination method of drilled core specimen testing was investigated with numerical and experimental studies. Effect of different drill diameters of holes of the rock specimens was analysed to assess the ideal drill-hole design. The aim of drilling process is decreasing the failure load and stress concentration at the adhesive part to prevent invalid failures. Drilled specimens were determined to fail due to the start of cracking under the condition of uniaxial tensile stress distribution at sidewalls of holes. It was found that drill bits with the diameter of 11 mm is usable for a practical specimen drilling process to make a significant decrease in the failure load of the core specimens with the NX size (@54 mm) diameter. According to the results obtained from numerical and experimental analyses, an equation was suggested to determine uniaxial tensile strength values of drilled core specimens with the hole diameter of 11 mm.
Keywords:
tensile strength of rock materials, rock testing, experimental rock mechanics, finite element analysesPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

