Numerical Investigation of Seismic Response of Hybrid Buckling Restrained Braced Frames
Abstract
The Conventional buckling restrained braces used in concentrically braced frames are expected to yield in both tension and compression without major degradation of capacity under severe seismic ground motions. One of the weakness points of a standard buckling restrained braced frame is the low post-yield stiffness and thus large residual deformation under moderate to severe ground motions. This phenomenon can be related to the low post-yield stiffness of the core segment in comparison to its elastic stiffness. This paper investigates the application of stainless steel as the core material in a hybrid buckling restrained brace. The “hybrid” term arises from the use of more than one core component with different steel materials, including high strength high-performance steel and stainless steel (304L) with high strain hardening in the core of buckling restrained brace. Nonlinear dynamic time history analyses were conducted on a variety of diagonally braced frames with different heights, in order to compare the seismic performance of standard (non-hybrid) and hybrid buckling restrained braced frames. The results showed that the proposed hybrid buckling restrained braces reduce the inter-story and specially the residual drift demands in buckling restrained braced frames.
Keywords:
buckling restrained brace, hybrid core, nonlinear dynamic time history analysis, story drift, residual story driftPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

