Static and Dynamic Analysis of Cracked Concrete Beams Using Experimental Study and Finite Element Analysis
Abstract
In this paper, a simple method for defining the effects of cracks on elastic behavior of beam is presented. The cracked sections were modelled as rotational springs and the problem was solved using the finite element method. The global stiffness matrix of a beam with multiply cracked section was then assembled. For calculation of rotational spring stiffness equivalent to uncracked and cracked sections, finite element models and experimental test were used.
The natural frequencies and mode shape of beams with multiple single-edge cracks were obtained and a new simple formula was proposed. Published numerical examples for cracked beams were used for validation.
Keywords:
crack, rotational spring, dynamic parameter, concrete beam, modal analysis, bending rigidityPublished Online
2017-11-13
How to Cite
Mazaheri, H., Rahami, H., Kheyroddin, A. “Static and Dynamic Analysis of Cracked Concrete Beams Using Experimental Study and Finite Element Analysis”, Periodica Polytechnica Civil Engineering, 62(2), pp. 337–345, 2018. https://doi.org/10.3311/PPci.11450
Issue
Section
Research Article
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

