Technological Aspects of Usage of Calcareous Fly Ash as a Main Constituent of Cements
Abstract
The use of mineral additives allows you to modify the properties of concrete and result in substantial economic benefits. The research the influence cement type with calcareous fly ash (W) content in cement, method of cement production, activation by grinding calcium fly ash and batch of fly ash on the rheology, plastic shrinkage, air content, the setting time and heat of hydration of mortar are presented in this paper. The results show that cements produced by intergrinding of the constituents or blending with fly ash pre-processed by milling, are characterized by acceptable technological properties, not differing significantly from other currently used cements. It is not recommended to use cements obtained by blending with raw calcareous fly ash W. Calcareous fly ash used for the production of cement should be selected because of its properties. According to conducted tests, this criterion can be the volume density of the ash, which should be at least 900 kg/m3. The negative effect of calcareous fly ash used as an additive for cement on workability is considerably smaller than when it is used as an additive type II.
Keywords:
calcareous fly ash, cement mortars, rheological properties, setting time, air content, heat of hydration, plastic shrinkagePublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

