Effect of Thermal and Freeze-thaw Stress on the Mechanical Properties of Porous Limestone
Abstract
This paper focuses on the effect of high temperature on the mechanical properties of a porous limestone that is widely used as dimension stone in Hungary. The changes in physical properties of 3 types of porous limestone were analyzed at 22 °C, 300 °C and 600 °C, respectively. The limestone specimens were also subjected to freeze-thaw cycles to assess the other extrinsic factor that influences the behavior. Parameters such as material density, bulk density, ultrasonic pulse velocity and tensile strength were measured and compared in different test conditions. The tests results indicate that fabric differences significantly influences the durability of tested limestones. Bioclastic grainstone is more frost resistant that ooidal grainstone or bioclastic packstone, but heating seems to reduce the pulse velocity and tensile strength of all tested limestone. It is suggested that cyclic freezing-thawing reduces the strength depending on the micro-fabric, while heating to 600 °C and the reduction of strength is less controlled by the fabric of the porous limestone.
Keywords:
tensile strength, ultrasonic pulse velocity, heating, freeze-thaw, porous limestonePublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

