Response of Refractory Cement Based Composite to Gradual Temperature Loading
Abstract
This paper deals with the experimental study of the response of refractory concrete mixture to gradual thermal loading, up to 1000 °C. A binding system based on calcium aluminate cement (CAC) modified by the partial replacement of metakaolin was used. Short ceramic fibers were applied in a dose of 4% by volume in the studied mixture. Material transformations due to thermal loading were monitored in terms of residual mechanical, fracture and basic physical properties-compressive strength, flexural strength, fracture energy, dynamic modulus of elasticity, and bulk density in the study. The results obtained corresponded well with the mineral transformations monitored using the thermogravimetric analysis performed on the binder paste. Residual values of compressive and flexural strength were approximately 40% of the initial values after exposure to a temperature of 1000°C; however, the dominant part of the total loss was monitored up to 400°C, due to decomposition of the hydrates. Fiber employment contributed considerably to the resistance against thermal loading up to 400°C, which was demonstrated by the fracture energy results (a loss of 25% was monitored). An additional increase of the temperature load led to micro crack propagation, which was obvious in the results of dynamic modulus of elasticity determination, in which the short fiber incorporation was noticeably limited.
Keywords:
refractory composite, metakaolin, ceramic fibres, elevated temperaturesPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

