An Investigation of Crack Propagation in Steel Fiber-Reinforced Composite Beams
Abstract
This paper investigates the cracking phenomena of fiber-reinforced concrete in steel and concrete composite beam systems. Various parameters contribute to the crack development and weakening of the composite system, while the concrete slab is bonded to the steel beam. The weakening can result from the longitudinal shear stress that causes cracking from shear connectors, cracking from tensile forces, crushing due to compressive forces and also cracking from concrete shrinkage. These cracks can contribute to premature failure of the composite beam. This paper investigates fiber reinforcement as a solution to decrease the amount of cracking in composite beams. The presented methodology includes experimental studies to evaluate cracking characteristics and strength of fiber-reinforced composite beams. Parameters of the study included spacing between studs, application of welded wire reinforcement, and fiber reinforcement. Results indicate the effectiveness of fiber-reinforcement in reducing crack widths and number of cracks, even though, spacing between studs and presence of welded wire were essential in crack control. Further, fiber-reinforced specimens showed higher compressive and tensile strength by 30% and 70% respectively. The deflection at the peak load also showed a 23% decrease for the specimen with hybrid fiber-wire reinforcement in comparison with the specimen reinforced with welded wire only.
Keywords:
composite construction, composite beams, fiber reinforced composites, fiber reinforced concrete, steel fibers, crackingPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

