Electrical Impedance Used for Measurement of Moisture Distribution in Thermal Insulation Plasters
Abstract
High moisture in building materials has a negative influence on their physical and thermal insulating properties. When building materials incorporated in a structure exceed the maximum permissible moisture, the material could change its properties to such an extent that its next usage is unfeasible. In case of thermal insulating materials, it causes serious degradation of thermal insulating properties. During the development of advanced thermal insulation plasters, long-term laboratory experiments were performed using masonry construction fragments, which focused on the study of their moisture proportions. For this purpose a new non-destructive method of electrical impedance was used, which enables measurements on defined levels in a matrix of test samples. Results obtained by measurements made on the surface of the samples were compared with the results obtained by a capacitive hygrometer. It was concluded that these methods provided similar results. The least moisture sensitive was the mixture, which was applied on masonry pillar E. In comparison with used thermal insulation plasters commonly used today this plaster shows considerably lower value of mass moisture under laboratory conditions, 1.38%. This pillar also exhibited the most uniform course of conductance measured along its height.
Keywords:
electrical impedance, moisture, thermal insulation plaster, moisture probePublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

