The Influence of Concrete Strength on the Effect of Synthetic Fibres on Fire Resistance
Abstract
Numerous studies have verified that increased concrete strength reduces its resistance to fire, leads to a higher degree of strength reduction and higher chances of spalling of concrete surfaces.
The risks of spalling of concrete surfaces can be reduced by adding synthetic polypropylene fibres. Numerous experiments have shown that the risk of spalling of the concrete surface is significantly lower when using short, small diameter fibres of polypropylene synthetic, because the pore structure created by the burning of fibres reduces the risk of cracking.
However, the question arises whether other types of fibres of greater diameter and length are still able to prevent spalling of concrete surfaces without drastically reducing the strength and if so, in what range of concrete strength it is true.
The experiments are aimed to determine the effects of micro and macro synthetic fibres on the post-fire residual compressive strength, flexural strength and porosity of concrete.
Nine kinds of mixture were prepared and tested. Three of them are without fibers (reference concretes) with diverse strength, three with synthetic micro-fibres with diverse strength and three with synthetic macro-fibres of diverse strength. The experiment was conducted with three concretes with different strength. Each type had a reference concrete without fibre reinforcement, one with micro- and one with macro-fibres.
Keywords:
fire, concrete strength, syntetic polypropylene fibersPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

