Taguchi-Based Optimization and Artificial Neural Network Modeling of Post-Weld Heat Treatment Effects on the Microstructural and Mechanical Performance of Friction Stir Welded AA3103 Alloy
Abstract
This investigation evaluates the combined influence of Taguchi-optimized friction stir welding (FSW) parameters and post-weld heat treatment (PWHT) on the microstructural evolution and tensile strength of AA3103 aluminium alloy joints, complemented by Artificial Neural Network (ANN) modeling for mechanical property prediction. A Taguchi L9 orthogonal array was implemented independently for three tool pin geometries (square, circular, and triangular), incorporating shoulder-to-pin diameter ratios (D/d = 3, 4, 5), spindle speeds (355, 710, 1400 RPM), and welding speeds (20, 40, 80 mm/min), resulting in 27 experiments. A two-stage PWHT was applied, consisting of annealing at 350 °C for 2 h to promote dislocation recovery and residual stress relaxation, followed by artificial ageing at 200–225 °C and water quenching. Tensile properties, evaluated according to ASTM E8/E8M-22, were statistically analysed using S/N ratios, ANOVA, regression model, and ANN. The D/d ratio emerged as the dominant factor governing strength retention, showing the highest S/N delta for ultimate tensile strength and yield strength, and representing the only statistically significant parameter for yield strength. Spindle speed primarily influenced ductility stability. The optimized parameter set (circular pin, D/d = 3, 1400, 40 mm/min) demonstrated superior strength and microstructure. PWHT reduced regression residual errors to within ±8% and promoted fine equiaxed grain stabilization in the stir zone with a moderated hardness gradient across the TMAZ and HAZ.
Keywords:
friction stir welding, AA3103 aluminium alloy, post-weld heat treatment, Taguchi L9 orthogonal array, tensile strength, microstructurePublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.
